Setup Instructions for Microsoft(r) Word Viewer for Windows(r) 95,
Version 7.1

System Requirements for the use of Microsoft Word Viewer 7.1
 -  A personal computer with a 386DX or higher processor
 -  Microsoft Windows 95 operating system or Microsoft Windows NT(tm)
    Workstation operating system 3.51 or later
 -  4 MB of memory for Windows 95 (8 MB recommended)
    12 MB of memory for Windows NT Workstation
 -  4 MB of hard disk space (6MB free for installation only)
 -  VGA or higher-resolution video adapter
 -  Microsoft Mouse or compatible pointing device

Installation of Word Viewer 7.1 is designed to take place from within Microsoft
Windows. If Windows is not running, please start it before continuing.

Make sure that all programs are closed, and make sure you are not running any
utilities or virus protection before proceeding.

To install Word Viewer, please follow these instructions:

1.  Your starting point for Word Viewer 7.1 installation depends upon whether
    you downloaded the WD95VW71.EXE file from an online service, or received
    Viewer on diskettes.

    - If you downloaded Viewer, double click WD95VW71.EXE in the folder you
      copied this file to. It will unpack the Word Viewer 7.1 distribution and
      start the Word Viewer 7.1 Setup program.
      Note: this starting location cannot be the folder into which you plan to
      install Viewer.

    - If you received Viewer on diskettes check disk1 for one of the following
      filenames, and continue as directed for that filename:

      ONLINE71.INF: Copy all the files from the diskettes into a single folder
      on your hard drive. Double click Setup.exe in this folder.
      Note: this starting location cannot be the folder into which you plan to
      install Viewer.

      FLOPPY71.INF: Double click Setup.exe on disk1.

2.  Word Viewer 7.1 Setup will prompt you for a folder in which to install
    Word Viewer. The default folder location for Word Viewer is:

    C:\PROGRAM FILES\WORDVIEW (C:\WordView on Windows NT 3.51).

3.  Click the "Installation" button to install Word Viewer 7.1.

4.  If Word Viewer Setup detects Word for Windows (version 6.0 or later)
    on your system, it will prompt you to determine which application
    should open Word documents by default. The 'default' application is used to
    open files with *.DOC file extensions when they are double-clicked in the
    Windows 95 shell.

    - Choosing "Open with Word" means that Word for Windows will be used
      by default to open Word files.

    - Choosing "Open with Viewer" means that Word Viewer will be used by
      default to open Word files.

NOTE: If you choose the "Open with Viewer" option, you MUST run the Word for
Windows Setup program if you want to restore Word for Windows as the default
viewer of Word documents, or if you remove Viewer from your computer. For more
information see "Restoring Word's Settings" in the Word Viewer 7.1 Readme.doc

5.  These are the correct file sizes for Viewer 7.1 once Setup is complete:

    File Name           File Size (bytes)       Location
    ============================================================
    docobj.dll             23,552               \WORDVIEW
    install.txt           (varies)              \WORDVIEW
    license.txt           (varies)              \WORDVIEW
    readme.doc            (varies)              \WORDVIEW
    sdm95.dll             126,464               \WORDVIEW
    ttemb32v.dll          107,008               \WORDVIEW
    wintl32v.dll          525,824               \WORDVIEW
    wordview.exe        2,508,592               \WORDVIEW
    mssetup.dll           249,344               \WORDVIEW\SETUP
    setup.exe             330,752               \WORDVIEW\SETUP
    setup.hlp              18,397               \WORDVIEW\SETUP
    setup.stf             (varies)              \WORDVIEW\SETUP
    viewer71.dll           72,704               \WORDVIEW\SETUP
    floppy71.inf            2,640               \WORDVIEW\SETUP
    ddewll.dll             34,304               \WORDVIEW\STARTUP
    ============================================================

6.  To run Word Viewer 7.1 in Windows 95, click the Start button on the 
    Windows 95 Taskbar and then point to Programs and choose Microsoft Word 
    Viewer. Alternatively, you can run Word Viewer by double-clicking on the
    WORDVIEW.EXE file in your \PROGRAM FILES \WORDVIEW folder. In Windows NT,
    double click on the Word Viewer icon in the Program Manager.

After Word Viewer 7.1 Setup is complete, WD95VW71.EXE deletes the files used for
Setup. If you plan to distribute Word Viewer 7.1, either online or on floppy
disks, you will need W95VW71.EXE or the files it unpacks. See " Distribution of
Word Viewer" in the Word Viewer 7.1 Readme.doc for more information.

For additional information on using Word Viewer 7.1, see Readme.doc, located
in the same directory as Word Viewer. To view this file, run Word Viewer 7.1,
click Readme.doc in the "Open" dialog box, and click OK. If The "Open" dialog is
not pointing to your WORDVIEW folder when you start Viewer, change to that
folder and open Readme.doc.

